Iron SDI 265
Small Form Factor SDI (up to 3G-SDI) ruggedized camera
Key Features:
- Maximal frame rate of 60 fps
- Monochrome and Color models
- Up to 3.2W power at full rate
- Full image processing feature set
- Optional Pan/Tilt alignment of the sensor
- Up to 3G-SDI interface
- C mount / CS mount
- Full EMVA1288 report
- Full built-in self-test (BIT)
- Full built-in voltage testing
- Customization as per user requirements
Applications:
- Perimeter vision
- 3D
- Low light surveillance
- Special Effects
- VR
Iron SDI 265
Innovative Approach – The Iron SDI 265 is a low-cost, low-power global shutter CMOS camera with an SDI interface which supports up to 3G-SDI, enabling 2k video at rates of up to 60fps.
Intelligent Design – This Iron camera incorporates Pregius’s IMX265 global shutter sensor with a 3.45µm pixel size. With a compact outline and low-key design, the Iron can be fitted into tight spaces. Superior sensor performance allows very low light vision capabilities.
Specifications
Pixel Size | 3.45 µm |
Sensor | Pregius IMX265 CMOS Sensor |
Video Output | 2k, 1080p, 1080i up to 60 fps |
Output Interface | Single-Link HD-SDI or 3D-SDI |
Output Format | 10-bit 4:2:2(Y’Cb’Cr’) / RAW (Bayer) |
Interface Connector | Micro-BNC |
Sensor Positioning | Full pan/tilt calibration for optical axes (optional) |
Electronic Shutter | Global shutter |
Monochrome / Color | Monochrome / Color |
Temporal Noise | < 2.2 e- @25°C |
Full Well Charge | 9828 e- |
Dynamic Range | > 70.8dB @520nm |
Signal-to-Noise Ratio (SNR max) | 40 dB @520nm |
Quantum Efficiency (QE) X FF | > 63% @525nm |
Shortest Exposure | 10 µs |
Exposure Control | Automatic Exposure/Gain, manual Exposure/Gain |
Color Control | Auto/Manual White balance |
LUT | |
RGB offsets, saturation control | |
Color correction matrix | |
Image Enhancement | Defect pixel correction |
Operational Time Counter | |
Auto/Manual black level | |
Binning | |
Flat field / Fixed patter noise correction | |
Image flip | |
Camera Configuration | RS232 direct ASCII protocol |
Synchronization | Tri-level sync input |
Mechanical & Electrical
Dimensions (including lens mount) | 44 mm x 44 mm x 38.7 mm (Height x Width x Depth) |
Lens Mount | C-mount, CS-mount, Active EF-mount or DC Auto Iris lenses |
Weight (without lens) | ~50g |
Power Input | 11-28V |
Power Consumption | <3.2W @ 12V DC |
Operating Temperature | -40°C to 80°C, 20-85% humidity (non-condensing) |
Storage Temperature | -40°C to 85°C, 10-90% humidity (non-condensing) |
Ingress Protection | Optional IP67 (with protective lens tube) |
Operational Shock | Tested per MIL-STD-810G Method 516.6, 3-axis Shock 75G |
Operational Vibration | Tested per MIL-STD-810G Method 514.6, 3-axis Vibration Category 20 |
* KAYA Instruments reserves the right to update the data sheet from time to time without prior notice.
HD-SDI
ST 292 (ST 274):
Supported Resolution | Supported FPS |
1080i 10-bit 4:2:2/RAW | 50, 59.94, 60 |
1080p 10-bit 4:2:2/RAW | 23.98, 24, 25, 29.97, 30 |
ST 292 (ST 2048-2):
Supported Resolution | Supported FPS |
2K 10-bit 4:2:2/RAW | 23.98, 24, 25, 29.97, 30 |
3G-SDI
ST 425-1 (ST 274):
Supported Resolution | Supported FPS |
1080p 10-bit 4:2:2/RAW | 50, 59.94, 60 |
ST 425-1 (ST 2048-2):
Supported Resolution | Supported FPS |
2K 10-bit 4:2:2/RAW | 47.95, 48, 50, 59.94, 60 |
Pregius’s IMX265 Mono Spectral Response |
Pregius’s IMX265 Color Spectral Response |